Wateq 2023 - Flipbook - Page 186
HARDNESS MONITORS
SOFTCONTROL CLACK
Softcontrol Clack is the "guardian" for a CLACK water softener, reducing
operating costs by up to 60%. The continuous maintenance of water softening
systems can be reduced to a necessary level.
The regeneration is automatically triggered on the CLACK control head when
the configured limit value is exceeded. The quality and throughput of soft water
per column is constantly analysed and displayed on the control panel.
Operating data such as flow rate, number of regenerations and other data are
electronically recorded and chronologically stored in the device. The savings
achieved are shown for each softener column. Optionally, the monitoring can
be extended to the brine / salt storage tank.
Softcontrol Clack can be installed on any water softener with sodium chloride
regeneration and CLACK control heads (type TWIN; WS 1.0; WS 1.5; WS 2.0
or WS 3.0).
SOFTCONTROL CLACK TECHNICAL DATA
Wall Mounted
400 x 250 x 160 mm (W x H x D) (in the immediate vicinity of the softener)
Weight
Approx 8 kg
Protection class of housing
IP 54
Surrounding temperature / relative humidity
5 °C to 50 °C; 20 % to 80 %
Relative Humidity
20 % … 80 %
Power Supply
Power supply unit 100 ... 240 Volt / 50 ... 60 Hz
Supply voltage
24 V DC, about 20 Watt
Raw and soft water connection
Lockable branch 1⁄4“ IT for PA-hose OD 4 mm, ID 2 mm, upstream dirt filter ≤ 0,1 mm
Raw and soft water pressure
Minimum 1 bar up to maximum 10 bar
Drain
Minimum Ø 15 mm, pressure-free (below the device)
Quality of Raw and Soft Water
According to the valid German drinking water ordinance Free from fats, oils and brine, germ count
